measurements.md

@@ -12,7 +12,7 @@ FieldFox RF Analyzer.
 3. [Oscilloscope](#oscilloscope)
 4. [Frequency Offset](#frequency-offset)
 5. [Transmit Power](#transmit-power)
-6. [Occupied Bandwidth](#occupided-bandwidth)
+6. [Occupied Bandwidth](#occupied-bandwidth)
 7. [DC Offset](#dc-offset)
 8. [IQ Imbalance](#iq-imbalance)
 
@@ -43,7 +43,7 @@ and measurement setup for the FieldFox:
 > See the [datasheet](datasheets/5990-9783.pdf) for full performance
 > specifications.
 
-## Spectrum Analyzer (SA)
+## Spectrum Analyzer
 
 Using the FieldFox as a basic spectrum analyzer is straightforward. Either
 attach an antenna or cable your transmitted signal into the *RF IN* port of
@@ -71,7 +71,7 @@ choose: `Marker > Peak`.
 Refer to the [user's guide](datasheets/N9927-90001.pdf) for full details on
 configuring the FieldFox.
 
-## Oscilliscope
+## Oscilloscope
 
 The FieldFox can be used as an oscilloscope by setting the frequency span to
 zero: `Freq > Freq Span`. You can then: